107
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
䳜 Use only genuine parts to repair
the rear bumper where the rear
corner radar is located.
䳜 Do not apply license plate frame
or objects, such as a film, acces
-
sories, molding and sticker or a
bumper painting near the rear
corner radar.
䳜 The function may not work prop
-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
䳜 If a trailer, carrier or other equip
-
ments is installed, it may
adversely affect the perfor
-
mance of the rear corner radar or
the function may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA) (Sensor fusion) (if equipped)"
on page 6-74.
Blind-Spot Collision-Avoidance
Warning settings
Setting features
Blind-Spot Safety
With the engine on, select or dese
-
lect 'Driver Assistance → Blind-Spot
Safety' from the Settings menu to
set whether or not to use each
function.
䳜 If 'Active Assist' is selected, the
function will warn the driver with
a warning message, an audible
warning and braking assist will be
applied depending on the collision
risk levels.
䳜 Warning Only: Blind-Spot Colli
-
sion-Avoidance Assist will warn
the driver with audible warning
and braking assist will be applied
depending on the collision risk lev
-
els. Braking will not be assisted,
so driver operate the vehicle
directly.
䳜 Off: Blind-Spot Collision-Avoid
-
ance Assist will turn off.
To Next Page
Loading...
