Driving your vehicle
1086
Blind-Spot Collision-Avoidance Assist (BCA)
If 'Blind-Spot Safety' function turn
on (select except for 'Off' function),
when the engine is restarted with
Blind-Spot Collision-Avoidance
Assist off, the outside rearview mir
-
ror will blink for 3 seconds. It means
the function is operated.
When the engine is restarted with
Blind-Spot Collision-Avoidance
Assist off, the 'Blind-Spot Safety
System is Off' message will appear
on the cluster.
Warning Timing
With the engine on, select 'Driver
Assistance → Warning Timing' from
the Settings menu to change the
initial warning activation time for
Blind-Spot Collision-Avoidance
Assist.
To select the Warning time 'Normal'
or 'Late'.
䳜 Normal: Use under normal driving
conditions. If it feels too sensitive,
set the warning timing to 'Late'.
If you change the Warning Timing,
the warning time of other Driver
Assistance may change.
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
Warning Volume for Blind-Spot Col
-
lision-Avoidance Assist.
If you change the Warning Volume,
the warning volume of other Driver
Assistance may change.
To Next Page
Loading...
