Driving your vehicle
1306
Manual Speed Limit Assist (MSLA)
The speed limit indicator
( ) light will illuminate on
the cluster.
2. Push the + switch up or - switch
down, and release it at the
desired speed. Move the + switch
up or - switch down and hold it.
The speed will increase or
decrease to the nearest multiple
of five (multiple of ten in km/h) at
first, and then increase or
decrease by 10 km/h (5 mph).
3. The set speed limit (1) will be dis
-
played on the cluster. The set
speed limit will blink and chime
will sound until you return the
vehicle speed within the speed
limit.
When the accelerator pedal is not
depressed beyond the pressure
point, vehicle speed will maintain
within the speed limit.
To Next Page
