Features of your vehicle
14
Theft-alarm system
Theft-alarm system (if
equipped)
Vehicles equipped with a theft alarm
system will have a label attached to
the vehicle with the following words:
1. 8A3NING
2. SECU3ITY SYSTEM
This system is designed to provide
protection from unauthorised entry
into the car. This system is operated
in three stages: the first is the
䳖Armed䳗 stage, the second is the
䳖Theft-alarm䳗 stage, and the third
is the 䳖Disarmed䳗 stage. If triggered,
the system provides an audible
alarm with blinking of the hazard
warning lights.
Armed stage
Using the smart key
Park the vehicle and stop the
engine. Arm the system as
described below.
1. Turn off the engine.
2. Make sure that all doors (and tail
-
gate) and the engine bonnet are
closed and latched.
3. Do one of following:
䳜 Lock the doors by pressing the
button of the front outside
door handle with the smart key
in your possession.
After completion of the steps
above, the hazard warning
lights operate once to indicate
that the system is armed.
If any door remains open, the
doors won't lock and the chime
will sound for 3 seconds. Close
the door and try again to lock
the doors.
If tailgate or engine bonnet
remains open, the hazard
warning lights won't operate
and theft-alarm will not arm.
After this, if the tailgate and
engine bonnet are closed, the
hazard warning lights will blink
once.
䳜 Lock the doors by pressing the
lock button on the smart key.
To Next Page
Loading...
