Features of your vehicle
1124
-ighting
8hen in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
Rear fog light (if equipped)
Type A
Type B
To turn the rear fog lights on, turn
the rear fog light switch (1) to the
on position when the headlight is
turned on.
To turn the rear fog lights off, turn
the rear fog light switch to the on
position again.
3ear fog light is only on the driver䳓s
side (if equipped).
Headlight levelling device
To adjust the headlight beam level
according to the number of the pas
-
sengers and loading weight in the
luggage area, turn the beam level
-
ling switch.
The higher the number of the
switch position, the lower the head
-
light beam level. Always keep the
headlight beam at the proper level
-
ling position, or headlights may daz
-
zle other road users.
Listed below are the examples of
proper switch settings. For loading
conditions other than those listed
below, adjust the switch position so
To Next Page
Loading...
