113
7
7
Maintenance -ight bulbs
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. 3emove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Glove box lamp bulb replacement
1. Using a flat-blade screwdriver,
gently pry the lamp assembly
from interior.
2. 3emove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to inte
-
rior.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Tailgate room lamp bulb replace
-
ment
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. 3emove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.