111
7
7
Maintenance -ight bulbs
the assembly and turn the socket
clockwise.
8. 3einstall the lamp assembly to
the body of the vehicle.
High mounted stop lamp bulb
replacement
If the high mounted stop lamp (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.
-icense plate lamp bulb replace
-
ment
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. 3emove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. 3emove the bulb from bulb-
socket by pulling it out.
4. Insert a new bulb by inserting it
into the bulb-socket.
. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
6. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Map lamp bulb replacement
Prior to working on the Interior
lamps, ensure that the 䳖OFF䳗 button
is depressed to avoid burning your
To Next Page
Loading...
