Driving your vehicle
905
Blind-Spot Collision Warning (BCW)
professional workshop. Kia rec
-
ommends to contact an autho
-
rised Kia dealer/service partner.
䳜 Use only genuine parts to repair
the rear bumper where the rear
corner radar is located.
䳜 Do not apply license plate frame
or object, such as a bumper
sticker, film or a bumper guard
near the rear corner radar.
䳜 The function may not work prop
-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
䳜 If a trailer, carrier, etc. is installed,
it may adversely affect the per
-
formance of the rear corner radar
or the function may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA) (Sensor fusion) (if equipped)"
on page -66.
Function settings
Setting
Blind-Spot Safety
8ith the ignition switch or ENGINE
STA3T/STOP button in the ON posi
-
tion, select or deselect 䳒Driver assis
-
tance → Blind-spot safety䳓 from the
User Settings menu to set whether
or not to use each function.
If 䳒8arning only䳓 is selected, the
function will warn the driver with a
warning message, an audible warn
-
ing depending on the collision risk
levels.
If 䳒Off䳓 is selected, the function will
turn off.
To Next Page
Loading...
