101
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
warning light on the outside rear
-
view mirror will blink for three sec
-
onds.
䳜 If 䳒8arning only䳓 is selected, brak
-
ing is not assisted.
䳜 If 䳒Off䳓 is selected, the driver
should always be aware of the
surroundings and drive safely.
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
Warning timing
8ith the ignition switch or ENGINE
STA3T/STOP button in the ON posi
-
tion, select 䳒Driver assistance →
8arning timing䳓 from the Settings
menu to change the initial warning
activation time for Blind-Spot
Safety system.
8hen the vehicle is first delivered,
8arning timing is set to 䳒Normal. If
you change the 8arning timing, the
warning time of other Driver Assis
-
tance functions may change.
䳜 The setting of the 8arning timing
applies to all functions of the
Blind-Spot Safety system.
䳜 Even though 䳒Normal䳓 is selected
for 8arning timing, if the vehicles
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 䳒Late䳓 for 8arning timing
when traffic is light and when
driving speed is slow.
Function operation
Function warning
Vehicle detection
䳜 To warn the driver a vehicle is
detected, the warning light on the
To Next Page
