Driving your vehicle
1025
Blind-Spot Collision-Avoidance Assist (BCA)
outside rearview mirror will illu
-
minate.
䳜 The function will operate when
your vehicle speed is above 20
km/h (12 mph) and the speed of
the vehicle in the blind spot area is
above 10 km/h (7 mph).
Collision warning
䳜 Collision warning will operate
when the turn signal is turned on
in the direction of the detected
vehicle.
䳜 If 䳒8arning only䳓 is selected from
the Settings menu, the collision
warning will operate when your
vehicle approaches the lane the
blind spot vehicle is detected.
䳜 8hen the turn signal is turned off
or you move away from the lane,
the collision warning will be can
-
celled and the function will return
to vehicle detection state.
䳜 The detecting range of the rear
corner radar is determined by a
standard road width, therefore,
on a narrow road, the function
may detect other vehicles in the
next lane and warn you. In con
-
trast, on a wide road, the function
may not be able to detect a vehi
-
cle driving in the next lane and
may not warn you.
䳜 8hen the hazard warning light is
on, the collision warning by the
turn signal will not operate.
If the driver's seat is on the left side,
the collision warning may occur
when you turn left. Maintain a
proper distance with the vehicles in
the left lane. If the driver's seat is on
the right side, the collision warning
may occur when you turn right.
Maintain a proper distance with the
vehicles in the right lane.
Collision-Avoidance Assist (whilst
driving)
䳜 To warn the driver of a collision,
the warning light on the outside
rearview mirror will blink and a
warning message will appear on
the cluster.
䳜 The function will operate when
your vehicle speed is between
60~200 km/h (40~120 mph) and
To Next Page
Loading...
