What to do in an emergency
306
If you have a flat tyre (with Tyre Mobility Kit)
ing vehicles aware of your loca
-
tion.
䳜 To be sure your vehicle will not
move, even when you're on fairly
level ground, always set your
parking brake.
䳜 Only use the TMK for sealing/
inflation passenger car tyres. Do
not use on motorcycles, bicycles
or any other type of tyres.
䳜 Do not remove any foreign
objectssuch as nails or screws -
that have penetrated the tyre.
䳜 Before using the TMK, read the
precautionary advice printed on
the sealant bottle!
䳜 Provided the car is outdoors,
leave the engine running. Other
-
wise operating the compressor
may eventually drain the car bat
-
tery.
䳜 Never leave the TMK unattended
whilst it is being used.
䳜 Do not leave the compressor run
-
ning for more than 10 min. at a
time or it may overheat.
䳜 Do not use the TMK if the ambi
-
ent temperature is below -30C (-
22F).
䳜 8hen the tyre and wheel are
damaged, do not use Tyre Mobil
-
ity Kit for your safety.
Technical Data
System voltage: DC 12 V
8orking voltage: DC 10 - 1 V
Amperage rating: 10 A 1A (at DC
12V operation)
Suitable for use at temperatures: -
30 ~ +70C (-22 ~ +18F)
Max. working pressure: 6 bar (87
psi)
Size
Compressor: 161 x 10 x .8 mm
(6.3 x . x 2.2 in.)
Sealant bottle: 81 x 8. mm (3.2
x 3.4 in.)
Compressor weight: 0.7 kg (1. lbs)
Sealant volume: 200 ml (12.2 cu. in.)
* Sealant and spare parts can be
obtained and replaced at an
authorised vehicle or tyre dealer.
Empty sealant bottles may be dis
-
posed of at home. Liquid residue
from the sealant should be dis
-
posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.