Driving your vehicle
1485
Rear Cross-Traffic Collision Warning (RCCW)
Rear Cross-Traffic Safety system
8ith the ignition switch or ENGINE
STA3T/STOP button in the ON posi
-
tion, select 'Driver assistance →
Parking safety → 3ear cross-traffic
safety' from the Settings menu to
turn on 3ear Cross-Traffic Safety
system and deselect to turn off the
function.
8hen the engine is restarted, 3ear
Cross-Traffic Safety system will
always turn on. However, if 'Off' is
selected after the engine is
restarted, the driver should always
be aware of the surroundings and
drive safely.
Warning timing
8ith the ignition switch or ENGINE
STA3T/STOP button in the ON posi
-
tion, select 'Driver assistance →
8arning timing ' from the Settings
menu to change the initial warning
activation time for 3ear Cross-Traf
-
fic Safety system.
8hen the vehicle is first delivered,
8arning timing is set to 'Normal' If
you change the 8arning timing, the
warning time of other Driver Assist
function may change.
䳜 The setting of the 8arning timing
applies to all functions of 3ear
Cross-Traffic Safety system.
䳜 Even though 'Normal' is selected
for 8arning timing, if the vehicles
from the left and right side
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for 8arning timing
when traffic is light and when
driving speed is slow.
If the ignition switch or ENGINE
STA3T/STOP button is changed to
the ON position, 8arning timing will
maintain the last setting.
Function operation
Function warning
3ear Cross-Traffic Safety system
will warn the driver when a collision
is imminent.