Maintenance
1007
-ight bulbs
Front turn signal lamp bulb
replacement (Headlamp Type A)
1. Open the bonnet.
2. 3emove the bulb-socket from the
headlamp assembly by turning
the bulb-socket counterclockwise
until the tabs on the bulb-socket
align with the slots on the head
-
lamp assembly.
3. 3emove the bulb from the bulb
-
socket by pressing it in and rotat
-
ing it counterclockwise until the
tabs on the bulb align with the
slots in the bulb-socket. Pull the
bulb out of the bulb-socket.
4. Insert a new bulb by inserting it
into the bulb-socket and rotating
it until it locks into place.
. Install the socket in the headlamp
assembly by aligning the tabs on
the bulb-socket with the slots in
the assembly. Push the bulb-
socket into the headlamp assem
-
bly and turn the socket clockwise.
Position lamp/Daytime running
lamp bulb replacement (Headlamp
Type A)
1. Open the bonnet.
2. 3emove the bulb-socket from the
headlamp assembly by turning
the bulb-socket counterclockwise
until the tabs on the bulb-socket
align with the slots on the head
-
lamp assembly.
3. 3emove the bulb from the bulb
-
socket by pressing it in and rotat
-
ing it counterclockwise until the
tabs on the bulb align with the
slots in the bulb-socket. Pull the
bulb out of the bulb-socket.
4. Insert a new bulb by inserting it
into the bulb-socket and rotating
it until it locks into place.
. Install the socket in the headlamp
assembly by aligning the tabs on
the bulb-socket with the slots in
the assembly. Push the bulb-
socket into the headlamp assem
-
bly and turn the socket clockwise.