Features of your vehicle
1044
-ighting
-ighting
Battery saver function
The purpose of this feature is to
prevent the battery from being dis
-
charged if the lights are left in the
ON position.
The system automatically shuts off
the parking lights after the engine is
off and the driver's door is opened.
However, the position lamps stay
ON even when the driver-side door
is opened if the headlamp switch is
turned to the position lamp ( )
or AUTO position after the engine is
turned off.
If necessary, to keep the lamps on
turn the position lamps OFF and ON
again using the headlamp switch on
the steering column after the
engine is turned off.
Headlight escort function (if
equipped)
The headlights (and/or taillights) will
remain on for approximately min
-
utes after the ignition key is
removed when the engine is turned
off. However, if the driver䳓s door is
opened and closed, the headlights
are turned off after 1 seconds.
The headlights can be turned off by
pressing the lock button on the
transmitter (or smart key) twice or
turning off the light switch from the
headlight or Auto light position.
If the driver gets out of the vehicle
through other doors (except driver's
door), the battery saver function
does not operate and the headlight
escort function does not turn off
automatically. Therefore, It causes
the battery to be discharged. In this
case, make sure to turn off the lamp
before getting out of the vehicle.
Headlight welcome function (if
equipped)
8hen the headlight switch is in the
ON or AUTO position and all doors
(and tailgate) are closed and locked,
if you press the door unlock button
on the transmitter (or smart key),
the headlights will come on for
about 1 seconds.
If the headlight switch is in the
AUTO position, the function can only
operate at night.
At this time, if you press the door
unlock button again or door lock
button on the transmitter (or smart
key), the headlights will turn off
immediately.
To Next Page
Loading...
