Driving your vehicle
1445
-ane Following Assist (-FA)
Function settings
Setting
Turning the function ON/OFF
8ith the ignition switch or the
ENGINE STA3T/STOP button in the
ON position, press the Lane Driving
Assist button located on the steer
-
ing wheel to turn on Lane Following
Assist. The white or green ( ) indi
-
cator light will illuminate on the
cluster.
Press the button again to turn off
the function.
Function operation
Warning and control
-ane Following Assist
If the vehicle ahead or both lane
markings are detected and your
vehicle speed is below 200 km/h
(120 mph), the green ( ) indicator
light will illuminate on the cluster,
and the function will help the vehicle
stay in lane by controlling the steer
-
ing wheel.
8hen the steering wheel is not con
-
trolled, the green ( ) indicator light
will blink and change to white.