109
7
7
Maintenance -ight bulbs
Stop and tail lamp (-ED type) bulb
replacement
If the stop and tail lamp (LED)
(1,2,3,4) does not operate, have
your vehicle checked by a profes
-
sional workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte
-
grated unit. The LED lamps has to
be replaced with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED),
for it may damage related parts of
the vehicle.
Back up lamp (Bulb type) bulb
replacement
Back up lamp type A
Back up lamp type B
1. Disconnect the negative (-) bat
-
tery terminal.
2. 3emove the rear wheel guard
after loosening the mounting
screws and clips.
3. Disconnect the back up lamp con
-
nector.
4. 3emove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
To Next Page
Loading...
