83
5
5
Driving your vehicle -ane Keeping Assist (-KA)
Turning the function ON/OFF
To activate/deactivate LKA :
8ith the ignition switch or ENGINE
-
STA3T/STOP button in the ON posi
-
tion, press and hold the Lane Driving
Assist button ( ) located on the
steering wheel to turn on Lane
Keeping Assist.
The indicator ( ) in the cluster
display will initially illuminate white.
If you press and hold the Lane Driv
-
ing Assist button located on the
steering wheel, LKA will be turned
off and the indicator on the cluster
display will go off.
The colour of indicator will change
depend on the condition of LKA.
䳜 8hite : Sensor does not detect
the lane marker or vehicle speed
is less than 60 km/h (37 mph).
䳜 Green : Sensor detects the lane
marker and function is able to
control the steering.
-KA function change
The driver can change LKA to Lane
Departure 8arning (LD8) or change
LKA mode selecting on the LCD dis
-
play 䳖User settings → Driver assis
-
tance → Lane safety → LKA (Lane
Keeping Assist)/LD8 (Lane Depar
-
ture 8arning)/off
-KA (-ane Keeping Assist)
LKA mode guides the driver to keep
the vehicle within the lanes. It rarely
controls the steering wheel, when
the vehicle drives well inside the
lanes. However, it starts to control
the steering wheel, when the vehicle
is about to deviate from the lanes.
-DW (-ane Departure Warning)
LD8 warns the driver with a visual
and acoustic warning when the
function detects the vehicle leaving
the lane. In this mode, the steering
wheel will not be controlled. 8hen
the vehicle䳓s front wheel contacts
the inside edge of lane line, the con
-
tacted line will be displayed on the
LCD display.
Off
If you select 䳒Off䳓, it is the same with
pressing and holding Lane Driving
Assist button ( ) on the steering
wheel.
To Next Page
Loading...
