Driving your vehicle
725
Forward Collision-Avoidance Assist (FCA) (Sensor
fusion)
䳜 Do not tint the window or install
stickers or accessories around the
inside mirror where the camera is
installed.
䳜 Make sure the front view camera
installation point does not get
wet.
䳜 Do not impact or remove any
front view camera/front radar
components.
䳜 Do not place reflective objects
(white paper or mirror etc.) on the
dashboard. The function may
activate unnecessarily due to
reflection of the sunlight.
䳜 Excessive audio function volume
may prevent occupants from
hearing FCA warning alarm.
Warning message and warning light
8hen the sensor is covered or the
sensor lens is dirty with foreign
substances, such as snow or rain,
FCA may not be able to detect vehi
-
cle or pedestrian.
In this case, a warning message will
appear to notify the driver. 3emove
the foreign substances to allow FCA
to function normally.
3emove any dirt, snow, or debris
and clean the radar sensor cover
before operating FCA.
FCA may not properly operate in an
area (e.g. open terrain), where any
vehicles or objects are not detected
after turning ON the vehicle.
Function malfunction
8hen FCA is not working properly,
FCA warning light ( ) will illumi
-
nate and the warning message will
appear for a few seconds.
To Next Page
Loading...
