31
4
4
Features of your vehicle Windows
using the halfway position on the
power window switch.
Always check for obstructions
before raising any window to avoid
injuries or vehicle damage. If an
object less than 4 mm (0.16 of an
inch) in diameter is caught between
the window glass and the upper
window channel, the automatic
reverse window may not detect the
resistance and will not stop and
reverse direction.
The automatic reverse feature
doesn't active whilst resetting
power window system.
Make sure body parts or other
objects are safely out of the way
before closing the windows to avoid
injuries or vehicle damage.
Power window lock button (if
equipped)
䳜 The driver can disable the power
window switches on the rear pas
-
senger doors by pressing the
power window lock button located
on the driver䳓s door to the LOCK
position (pressed).
䳜 When the power window lock
button is in the -OCK position
(pressed), the driver䳓s master
control can operate all power
windows. Also, the front passen
-
ger䳓s control can operate the
front passenger䳓s power window.
䳜 To prevent possible damage to
the power window system, do not
open or close two windows or
more at the same time. This will
also ensure the longevity of the
fuse.
䳜 Never try to operate the main
switch on the driver's door and
the individual door window switch
in opposite directions at the same
To Next Page
Loading...
