47
4
4
Features of your vehicle Mirrors
Day/night rearview mirror
* (1) : Day, (2) : Night
Make this adjustment before you
start driving and whilst the day/
night lever is in the day position (1).
Pull the day/night lever toward you
(2) to reduce the glare from the
headlights of the vehicles behind
you during night driving.
3emember that you lose some
rearview clarity in the night position.
Electrochromic mirror (ECM) (if
equipped)
The electric rearview mirror auto
-
matically controls the glare from
the headlights of the vehicles behind
you in nighttime or low light driving
conditions. The sensor (3) mounted
in the mirror senses the light level
around the vehicle, and automati
-
cally controls the headlight glare
from the vehicles behind you.
8hen the engine is running, the
glare is automatically controlled by
the sensor mounted in the rearview
mirror.
8henever the shift lever is shifted
into reverse (3), the mirror will
automatically go to the brightest
setting in order to improve the driv
-
ers view behind the vehicle.
8hen cleaning the mirror, use a
paper towel or similar material
dampened with glass cleaner. Do not
spray glass cleaner directly on the
mirror. It may cause the liquid
cleaner to enter the mirror housing.
To operate the electric rearview
mirror:
䳜 The mirror defaults to the ON
position whenever the ignition
switch is turned on.
䳜 Press the ON/OFF button (1) to
turn the automatic dimming
To Next Page
Loading...
