49
4
4
Features of your vehicle Mirrors
Remote control
Electric type
The electric remote control mirror
switch allows you to adjust the
position of the left and right outside
rearview mirrors. To adjust the
position of either mirror, the ignition
switch should be in the ACC position.
To adjust the position of either mir
-
ror, press the 3 or L button (1) to
select the right side mirror or the
left side mirror, then press a corre
-
sponding point (▲) on the mirror
adjustment control (2) to position
the selected mirror up, down, left or
right.
After adjustment, press the 3 or L
button again to prevent the inadver
tent adjustment.
䳜 The mirrors stop moving when
they reach the maximum adjust
-
ing angles, but the motor contin
-
ues to operate whilst the switch is
pressed. Do not press the switch
longer than necessary, the motor
may be damaged.
䳜 Do not attempt to adjust the out
-
side rearview mirror by hand.
Doing so may damage the parts.
䳜 8hen the mirror control, press
exactly 䳖▲䳗 (2) marking area.
Otherwise, the mirror will move to
unintended direction or malfunc
-
tion.
Folding the outside rearview mirror
Electric Type (if equipped)
To fold the outside rearview mirror,
depress the button.
To unfold it, depress the button
again.
The electric type outside rearview
mirror operates even though the
ignition switch is in the OFF position.
However, to prevent unnecessary
battery discharge, do not adjust the
To Next Page
Loading...
