Driving your vehicle
145
ENGINE START/STOP button
䳜 With Automatic Transmission/
Dual Clutch Transmission
Press the ENGINE STA3T/STOP but
-
ton whilst it is in the ACC position
without depressing the brake pedal.
The warning lights can be checked
before the engine is started. Do not
leave the ENGINE STA3T/STOP but
-
ton in the ON position for a long
time. The battery may discharge,
because the engine is not running.
START/RUN (Not Illumi
-
nated)
䳜 With Manual Transmission
To start the engine, depress the
clutch pedal and brake pedal, then
press the ENGINE STA3T/STOP but
-
ton with the shift lever in the N
(Neutral) position.
With Intelligent Manual Transmis
-
sion (iMT)
Depress the clutch pedal fully and
shift the transmission into Neutral.
Keep the clutch pedal and brake
pedal depressed whilst pressing the
ENGINE STA3T/STOP button to the
STA3T position. If the status is
changed into ACC, it will be displayed
on the cluster as in the following
pop-up.
8hen the shift lever is not placed in
N (Neutral), the following pop-up
will be displayed on the cluster.
䳜 With Automatic Transmission/
Dual Clutch Transmission
To start the engine, depress the
brake pedal and press the ENGINE
STA3T/STOP button with the shift
lever in the P (Park) or the N (Neu
-
tral) position. For your safety, start
the engine with the shift lever in the
P (Park) position.
To Next Page
Loading...
