EasyManua.ls Logo

Kia Stonic YB 2021 - Page 282

Kia Stonic YB 2021
640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving your vehicle
325
Intelligent Manual Transmission (iMT)
WARNING
Before leaving the drivers seat,
always set the parking brake fully
and shut the engine off. Then
make sure the transmission is
shifted into 1st gear when the
vehicle is parked on a level or
uphill grade, and shifted into 3
(3everse) on a downhill grade.
Unexpected and sudden vehicle
movement can occur if these pre
-
cautions are not followed in the
order identified.
Do not use the engine brake
(shifting from a high gear to
lower gear) rapidly on slippery
roads.
The vehicle may slip causing an
accident.
Using the clutch
The clutch should be pressed all the
way to the floor before shifting,
then released slowly. The clutch
pedal should always be fully
released whilst driving. Do not rest
your foot on the clutch pedal whilst
driving. This can cause unnecessary
wear. Do not partially engage the
clutch to hold the vehicle on an
incline. This causes unnecessary
wear. Use the foot brake or parking
brake to hold the vehicle on an
incline. Do not operate the clutch
pedal rapidly and repeatedly.
CAUTION
8hen operating the clutch pedal,
press the clutch pedal down fully. If
you dont press the clutch pedal
fully, the clutch may be damaged or
noise may occur.
WARNING
Using the clutch
Depress the clutch pedal as far as
possible. Be aware not to apply the
pedal again before it returns to the
normal position. If the pedal is
repeatedly depressed before
returning to its normal position, the
clutch system might be damaged.
Do not overload the vehicle. Starting
or driving a vehicle in this situation
generates too much frictional heat
to the clutch disk which might cause
damage to the clutch cover and disk.
8hen starting the vehicle or driving
backwards, releasing the clutch
pedal too soon after shifting the
lever might turn off the engine and
lead to an accident.
Downshifting
8hen you must slow down in heavy
traffic or whilst driving up steep
hills, downshift before the engine
starts to labour. Downshifting
reduces the chance of stalling and
gives better acceleration when you

Table of Contents

Related product manuals