9
3
3
Safety features of your vehicle Seats
Removal and installation
To remove the headrest:
1. 3ecline the seatback (2) with the
recline lever (1).
2. 3aise headrest as far as it can go.
3. Press the headrest release button
(3) whilst pulling the headrest up
(4).
N&7&3 allow anyone to ride in a
seat with the headrest removed.
To reinstall the headrest :
1. Put the headrest poles (2) into
the holes whilst pressing the
release button (1).
2. 3ecline the seatback (4) with the
recline lever (3).
3. Adjust the headrest to the appro
-
priate height.
Always make sure the headrest
locks into position after reinstalling
and adjusting it properly.
Forward and backward adjustment
(if equipped)
The headrest may be adjusted for
-
ward to 4 different positions by
pulling the headrest forward to the
desired detent. To adjust the head
-
rest to it䳓s furthest backwards posi
-
tion, pull it fully forward to the
farthest position and release it.
Adjust the headrest so that it prop
-
erly supports the head and neck.
To Next Page
Loading...
