27
6
6
What to do in an emergency If you have a flat tyre (with Tyre Mobility Kit)
Using the Tyre Mobility Kit
1. Detach the speed restriction label
(1) from the sealant bottle (2),
and place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the
driver not to drive too fast.
2. Filling the sealant Strictly follow
the specified sequence, other
-
wise the sealant may escape
under high pressure.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto
the connector of the sealant bot
-
tle (A).
. Ensure that button () on the
compressor is not pressed.
6. Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (3) of the seal
-
ant bottle onto the valve.
7. Insert the sealant bottle into the
housing of the compressor so
that the bottle is upright (B).
8. Ensure that the compressor is
switched off, position 0.
Securely install the sealant filling
hose to the valve. If not, sealant
To Next Page
Loading...
