Maintenance
427
Engine oil (Petrol)
Smartstream G1.2
(Petrol engine) 1.4 MPI
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to
reach normal operating tempera
-
ture.
3. Turn the engine off, remove the
oil filler cap and pull the dipstick
out. 8ait for 1 minutes for the
oil to return to the oil pan.
4. 8ipe the dipstick clean and re-
insert it fully.
. Pull the dipstick out again and
check the level. Check if the oil
level is between the F-L line, and
if it is below the L line, add enough
oil to bring the level to F line.
Radiator hose
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may be
hot enough to burn you.
8hen you wipe the oil level gauge,
you should wipe it with a clean cloth.
8hen mixed with debris, it can
cause engine damage.
Smartstream G1.0 T-GDi / Smart
-
stream G1.0 T-GDi 48V HEV
To Next Page
Loading...
