Safety features of your vehicle
343
Child Restraint System (CRS)
Type B
Child restraint system top tether
anchorages are located on the back
of the rear seatbacks.
1. Route the Child Restraint System
top-tether strap over the seat
-
back. Placing the top tether strap,
please follow the instructions of
the Child Restraint System manu
-
facturer.
2. Connect the top-tether strap to
the top-tether anchorage, then
tighten the top-tether strap
according to the instructions of
your Child Restraint System's
manufacturer to firmly attach the
Child Restraint System to the
seat.
Take the following precautions
when installing the top-tether:
䳜 Read and follow all installation
instructions provided with your
Child Restraint System.
䳜 NEVER attach more than one
Child Restraint System to a single
IS0FIX top-tether anchorage. This
could cause the anchorage or
attachment to come loose or
break.
䳜 Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached to
something else.
䳜 Child Restraint System anchor
-
ages are designed to withstand
only those loads imposed by cor
-
rectly fitted Child Restraint Sys
-
tem.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehicle.
To Next Page
Loading...
