Maintenance
987
-ight bulbs
Side repeater lamp (-ED type) bulb
Replacement
If the side repeater lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte
-
grated unit. The LED lamps has to
be replaced with the unit.
A skilled technician should check or
repair side repeater lamp (LED), for
it may damage related parts of the
vehicle.
Side repeater lamp (Bulb type) bulb
Replacement
1. 3emove the lamp assembly from
the vehicle by prying the lens and
pulling the assembly out.
2. Disconnect the bulb electrical con
-
nector.
3. Separate the socket and the lens
parts by turning the socket coun
-
terclockwise until the tabs on the
socket align with the slots on the
lens part.
4. 3emove the bulb by pulling it
straight out.
. Insert a new bulb in the socket.
6. 3eassemble the socket and the
lens part.
7. Connect the bulb electrical con
-
nector.
8. 3einstall the lamp assembly to
the body of the vehicle.
To Next Page
Loading...
