Safety features of your vehicle
383
Child Restraint System (CRS)
3. Remove as much slack from the
belt as possible by pushing down
on the Child Restraint System
whilst feeding the shoulder belt
back into the retractor.
4. Push and pull on the Child
Restraint System to confirm that
the seat belt is holding it firmly in
place.
If your Child Restraint System man
-
ufacturer recommends the use of a
top-tether with the lap/shoulder
belt, If your Child Restraint System
manufacturer recommends the use
of a top-tether with the lap/shoul
-
der belt, please refer to "IS0FIX
anchorage and top-tether anchor
-
age (IS0FIX anchorage system) for
children (if equipped)" on page 3-31.
To remove the Child Restraint Sys
-
tem, press the release button on
the buckle and then pull the lap/
shoulder belt out of the Child
Restraint System and allow the seat
belt to retract fully.
To Next Page
Loading...
