Keep the unit away from the flammable gas.
Otherwise it causes a fire.
Follow the below proposed conditions for the installation.
Otherwise it causes a fire or an electrical shock.
Away as much as possible from areas where the unit is likely to
be exposed to direct water spray and free as much as possible
from shocks and engine vibration.
Away as much as possible from areas of high temperatures or
areas where the unit is likely to be exposed to direct sunlight.
Do not install the KDS-5000BB on unstable or uneven surfaces.
Installing the unit tentatively may result in dropping, toppling over or
injury.
Follow the below conditions for wirings.
Otherwise it causes heat, a fire or injury.
Run the cables not to touch the rotary obstacles or disturb the operation.
Do not use the cables bent, twisted or stretched by force.
Do not put heavy objects on the cables.
Always turn off the power before connecting or disconnecting the unit.
Pulling the cables may damage the cables themselves and result in fire
or electrical shock.
To Next Page
Loading...