Koden KDS-5000BB - Page 90

- 82 -
FUNCTION SETTINGS
[HOW TO UPDATE VERSION]
Insert the USB stick contains the upgraded files.
Use the Cursor Shift key ( or ) to select “NEXT”.
Pressing the Cursor Selection key O / + updates the program.
After rebooting the unit, it is operated with the updated version.
2. BACKUP
This is the way to back up the settings.
Use the Cursor Shift key ( or ) to select “BACKUP”.
The following menu appears on the bottom of the screen after pressing the Cursor Selection
key (O / +). Use the Cursor Shift key ( or ) to select.
BACKUP
? Where to back up?
Use the Cursor Shift key ( or )
! Plug in Memory stick now in case of USB
to select “CANCEL” and press the Cursor
work.
Selection key (O / +) to close this menu.
INTERNAL
MEMORY USB
CANCEL
[HOW TO BACK UP THE SETTINGS]
Use the Cursor Shift key ( or ) to select where to back up (INTERNAL or MEMORY
USB) and press the Cursor Selection key (O / +) to backup the settings.
3. RECOVERY
This is the way to recover the settings.
Use the Cursor Shift key ( or ) to select “RECOVERY”.
The following menu appears on the screen after pressing the Cursor Selection key
(O / +). Use the Cursor Shift key ( or ) to select.
RECOVERY
? Which item do you store?
Use the Cursor Shift key ( or )
! Plug in Memory stick now in case of USB
to select “CANCEL” and press the Cursor
work.
Selection key (O / +) to close this menu.
INTERNAL
MEMORY USB
FACTORY SETTTINGS
CANCEL
[HOW TO RECOVER THE SETTINGS]
Use the Cursor Shift key ( or ) to select what to recover (INTERNAL, MEMORY USB or
FACTORY SETTINGS) and press the Cursor Selection key (O / +) to recover the settings.
Selecting the factory settings will back to the factory settings.
4. VERSION
Use the Cursor Shift key ( or ) to select “VERSION” to know the version of the program
in this unit.