Konica Minolta MS7000 MK II - When the Paper Misfeed Indicator Lights up; If the Misfeed Indicator Lights up Along with a P0 Code; If the Misfeed Indicator Lights up Along with a P1, P2 or P3 Code

MSP 3500 Printer
4
4-15
4.6 When the Paper Misfeed Indicator Lights Up
If the Misfeed Indicator lights up along with a P0 code:
The size or the direction of the paper loaded in the paper tray does not
match that set for the tray.
Load the paper of the set size in the set direction and then open and close
the Upper Unit.
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:
A misfeed has occurred in the Printer. Clear the sheet of misfed paper by
following the procedure given below.
CAUTION
§ The Fusing Unit inside the printer becomes very hot during operation.
To avoid a burn, be very careful not to touch it.