Miscellaneous
8
8-7
Settings in Each User Mode Function
U1: Special Print Mode
This function is not available.
U2: Engineering Enhancement Mode
Slight image distortion occurring in the scan direction can be corrected
with this function.
Before Correction
After Correction
1
Select U2 in the User mode.
2
Press the Exposure Mode key to display d*.
3
Press the Exposure Adjustment key (Darker or Lighter) to select the
desired setting value.
4
Press the Start key to validate the setting value.
NOTE:
This setting returns to the default value when the Power Switch
is turned OFF.
You can register the setting value using with the Job Program.
See p. 3-45.
To Next Page
Loading...
Need help?
General
