Code Setting Value Initial Setting
d0 0mm
d1 0.5mm
d2 1.0mm
d3 1.5mm *
d4 2.0mm
d5 2.5mm
d6 3.0mm
d7 3.5mm
d8 4.0mm
8
Miscellaneous
8-8
U3: Auto Power Save
Time it takes the unit to be automatically set into the Power Save mode
can be set.
1
Select U3 in the User mode.
2
Press the Exposure Mode key to display d*.
3
Press the Exposure Adjustment key (Darker or Lighter) to select the
desired setting value.
4
Press the Start key to validate the setting value.
Code Setting Value Initial Setting
d1 Auto Power Save (15 min.) *
d2 Auto Power Save (30 min.)
d3 Auto Power Save (60 min.)
To Next Page
Loading...
Need help?
General
