Scanner
3
3-14
G Misfeed Clearing Procedure
Locate the misfeed using the code and perform the misfeed clearing
procedure.
Display Code Description
The wrong size paper has been loaded in the
Paper Feeding Tray.
Load the set size paper in the set direction. This
code also appears when two or more sheets of
paper are taken up at the same time.
A misfeed near the paper take-up section or more
sheets of paper are taken up at the same time.
A misfeed near the Toner Cartridge.
A misfeed near the Fusing Unit.
An aperture card misfeed has occurred in ACF-7.
Remove the card that has been misfed in ACF-7.
To Next Page
Loading...
Need help?
General
