Global P0: Basic Setup 0–2: System Preference
219
0–2b: Memory Protect
Program [Off, On]
This setting protects the internal program memory.
On (checked): Internal program memory will be protected,
and the following write operations cannot be performed.
•Writing a program
• Loading preloaded program data
• Loading program data from media
• Receiving program data via MIDI data dump
Off (unchecked): Data can be written to internal program
memory.
Combination [Off, On]
This setting protects the internal combination memory.
On (checked): Internal combination memory will be
protected, and the following write operations cannot be
performed.
•Writing a combination
• Loading preloaded combination data
• Loading combination data from media
• Receiving combination data via MIDI data dump
Off (unchecked): Data can be written to internal
combination memory.
Song [Off, On]
This setting protects the internal song memory.
However, when the power is turned off, the song data in
song memory will be lost regardless of this setting.
On (checked): Internal song memory will be protected, and
the following write operations cannot be performed.
• Recording to the sequencer
• Loading preloaded song data
• Loading song data from media
• Receiving song data via MIDI data dump
Off (unchecked): Data can be written to internal song
memory.
Drum Kit [Off, On]
This setting protects the internal drum kit memory.
On (checked): Internal drum kit memory will be protected,
and the following write operations cannot be performed.
•Writing a drum kit
• Loading preloaded drum kit data
• Loading drum kit data from media
• Receiving drum kit data via MIDI data dump
Off (unchecked): Data can be written to internal drum kit
memory.
Arpeggio User Pattern [Off, On]
This setting protects the internal user arpeggio pattern
memory.
On (checked): Internal user arpeggio pattern memory will
be protected, and the following write operations cannot be
performed.
•Writing a user arpeggio pattern
• Loading preload arpeggio pattern data
• Loading user arpeggio pattern data from media
• Receiving user arpeggio pattern data via MIDI data
dump
Off (unchecked): Data can be written to internal user
arpeggio pattern memory.
▼0–2: Menu Command
• 0: Write Global Setting ☞p.251
• 1: Load Preload/Demo Data ☞p.251
• 2: Change all bank references ☞p.251
•3: Touch Panel Calibration ☞p.252
•4: Half Damper Calibration ☞p.252
•5: Update System Software ☞p.252
For more information, please see “Global: Menu Command”
on page 251.
To Next Page
Loading...
