microKORG2 Connecting and getting ready to play - Connecting to other devices
23
3 Close the battery cover.
Setting the battery type
To ensure the correct battery level is shown, set which type of battery (alkaline or nickel-metal
hydride) you are using.
Set this after you turn the power on.
1 Press the EDIT GLOBAL button to access the GLOBAL [1/ 5] page.
2 Turn the EDIT CONTROL 4 knob to set the battery type.
Alkaline: alkaline batteries
Ni-MH: nickel-metal hydride batteries
Remaining amount of battery power
The remaining amount of battery power and related information are shown at the top right-hand part
of the display. → Status
Power: Hi, Low, Alert, Empty, Now Measuring
Shows the remaining battery power in steps.
: when using an AC adapter
Note:
When the batteries are about to run out of power, the low power alert will appear. If you
continue to use the microKORG2 in this state, the auto-protect feature will activate, preventing pro-
grams and global settings from being saved. We recommend that you either replace the batteries as
soon as possible or connect an AC adapter. If you wish to save the settings you’re now editing even
while in this state, connect an AC adapter and perform the write operation.
Be sure to insert the batteries in the correct orientation.
To Next Page
Loading...
