Korg SV-2 User Manual

96| The Editor
Plate
This models a type of reverb unit that works by vibrating a metal plate. It is
adjusted to a fairly short reverb time. This reverberation is characterized by
a rapid attack, and is suitable for percussive playing.
Parameters Values Notes
Time 1…30 Sets the reverb time.
Lo Gain -15.0…15.0 Adjusts the low-frequency range.
Hi Gain -15.0…15.0 Adjusts the high-frequency range.
Pre Delay 0…200 Sets the initial delay before the reverberation begins. By
adjusting this setting you can clarify the definition of the
original sound.
Mix 0…100 Adjusts the mix between the direct signal and the effect.
Hall
This models the reverberation of a concert hall with numerous reflections.

Korg SV-2 Specifications

General

Polyphony	128 voices
Sound Engine	PCM
Keyboard	88-key RH3 (Real Weighted Hammer Action 3)
Effects	Reverb, Delay, Chorus, EQ, Amp Simulator
Amplifier	Built-in stereo amplifier
Connections	MIDI In/Out, USB
Power Supply	AC adapter (included)