Korg SV-2 User Manual

Using the effects |29
English
or AB) and negative-feedback circuit (or lack thereof) are also carefully sim-
ulated.
2 You can change the preamp’s volume (therefore, its overdrive saturation)
by using the DRIVE knob. To return to the original setting, press the DRIVE
knob.
NOTE: Extreme DRIVE settings may cause unwanted distortion. If this happens, low-
er its setting.
AMPLIFIER type DRIVE knob
Clean PreVol
Twin PreVol
Tweed PreVol
AC30 PreVol
Boutique PreVol
Organ Drive
Modulation
In the MODULATION section you can select a modulation effect. This selects
one of six modulation effect models. Effects are placed after the amp and
cabinet model.
1 Use the TYPE knob of the MODULATION section to select a different modu-
lating effect (chorus, phaser, flanger or rotary speaker).
2 You can change the speed of the modulation (or horn rotation) by using the
SPEED knob, and the intensity (or horn acceleration) by using the INTENSITY
knob. To return to the original settings, press the SPEED or INTENSITY knob.
3 If the rotary effect is selected, use the Slow/Fast button to change the ro-
tor’s speed.

Korg SV-2 Specifications

General

Polyphony	128 voices
Sound Engine	PCM
Keyboard	88-key RH3 (Real Weighted Hammer Action 3)
Effects	Reverb, Delay, Chorus, EQ, Amp Simulator
Amplifier	Built-in stereo amplifier
Connections	MIDI In/Out, USB
Power Supply	AC adapter (included)