page 64 Density measurement
The following table shows the course of the measurement:
Density measurement
Display Action Explanation
Sample:
insert the sample
and enter a name
Insert the sample
and use the keypad
to enter a sample
name.
Maximum 22 characters
Only if defined in
Setup:
In succession
Field
1
,
Field 2
,
Field 3
Enter the required
contents in the text
fields
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields assigned
to the corresponding data of the
current measurement.
User:
please enter a
name
Use the keypad to
enter an operator
name.
Maximum 22 characters
Taring
automatic
Taring the holding device for the
probe
Put the stick onto
the hook
Place the probe on
the holding device
using forceps.
Measuring
automatic
Determines the weight of the
probe in air
To Next Page
Loading...
