Kurzweil PC3 - The AMP Page

6-56
Program Mode
The PITCH Page
The PITCH Page
The PITCH page parameters for KB3 programs is much like the PITCH page parameters for
VAST programs. The only difference is that for KB3 programs, there are no Hz, KeyTrk, or
VelTrk parameters. For a full description of the PITCH-page parameters, see Common DSP
Control Parameters on page 6-14, The DSP Control (DSPCTL) Page on page 6-28, and The DSP
Modulation (DSPMOD) Page on page 6-29.
The AMP Page
The AMP page parameters for KB3 programs is much like the AMP page parameters for VAST
programs. The only difference is that for KB3 programs, there are no KeyTrk or VelTrk
parameters. For a full description of the AMP page parameters, see Common DSP Control
Parameters on page 6-14, The DSP Control (DSPCTL) Page on page 6-28, and The DSP Modulation
(DSPMOD) Page on page 6-29.