Effects
The MASTER Page
9-7
The MASTER Page
NOTE: In Setup mode and Song mode, this page corresponds in appearance and function to the
MASTFX page, though the MASTFX page works on a per setup/song basis.
Pressing the MASTER soft button calls up the MASTER page. The MASTER page contains the
settings for the master EQ and Compressor. The page appears as shown below:
The two boxes in the chain on the MASTER page are the master Compressor and EQ Effects.
Press the Edit button while either of these boxes is selected to edit the parameters for the box’s
effect. See Equalizers (EQ) on page 9-13 and Compressors, Expanders, and Gates on page 9-14 for
description on the EQ and Compressor parameters.
Mode
The setting for the Master Effects can be set directly on this page, or optionally in the control
setup. To set up the Master Effects from the MASTER page, set the Mode parameter to Master.
To use the settings in the current control setup, select Setup. Controlling the Master Effects from
the control setup allows for convenient switching between different configurations.
Order
Use the Order parameter to determine the order of the two effects. Setting Order to Compressor
=> EQ routes signal through the Compressor first, and then through the EQ. Setting Order to
EQ => Compressor routes signal through the EQ first, and then through the Compressor.
Master FX
The Master FX parameter determines whether the Master Effects are enabled or bypassed.
Setting Master FX to Master FX Enabled enables the Master Effects. Setting Master FX to Master
FX Bypassed bypasses the Master Effects, and effectively removes them from the signal path.
See Master Effects on page 9-4 for a description of the Master Effects.
Parameter Range of Values Default
Mode Master, Setup Master
Order Compressor => EQ,
EQ => Compressor
Compressor => EQ
Master FX Master FX Enabled,
Master FX Bypassed
Master FX Enabled
To Next Page
Loading...
