Kurzweil PC3 Musician's Guide

Program Mode
Algorithm Basics
6-17
Alt Input for Algorithms (Cascade Mode)
Cascade mode is a particularly powerful feature of the PC3 that allows you to create unique
algorithms of previously unattainable levels of complexity. The following three figures show the
signal path of a program configured using the PC3’s new Cascade mode:
On the ALG (Algorithm) page of every layer, the Alt Input parameter lets you select any other
layer to go through the current layer’s DSP. You can set it up so that layer 1 goes into layer 2 into
3 (as shown above). If you turn down the volume on layers 1 and 2, then you are hearing true
cascading—it’s like a big chain with each algorithm feeding into the next, and what you hear is
layer 3’s output. You can also have the volumes of all three layers turned up, which will mix the
signal of all three layers. You could, in the same program, also decide to run layer 4 into 5 into 6
into 13 into 25 if you wanted. Any of the 32 layers can go into any other layer.

Kurzweil PC3 Specifications

General

Polyphony	128 voices
Sound Engine	VAST (Variable Architecture Synthesis Technology)
Display	240 x 64 backlit LCD
MIDI	In, Out, Thru
Multitimbral	16 parts
Effects	reverbs, delays, chorus, flanger, phaser, distortion
Sequencer	16-track sequencer
Type	Synthesizer Workstation
Oscillators	VAST oscillators
Memory	64MB
Connectivity	USB, MIDI