Kurzweil PC3 Musician's Guide

7-44
Setup Mode
The COMMON Page
The COMMON Page
The COMMON page contains parameters that effect every zone in the current setup.
Tempo
When Clock Source is set to Internal, the Tempo parameter sets the PC3 system’s tempo. The
Tempo parameter values are in units of bpm (beats per minute).
Clock Source
With the Clock Source parameter, you can set the PC3—within the current setup—to generate its
own tempo by setting Clock Source to Internal, or you can set the PC3 to sync up with the
tempo from another device—assuming the device is sending MIDI clock data to the PC3 via
MIDI or USB—by setting Clock Source to External. When Clock Source is set to External, the
Tempo parameter disappears from the display.
154 ArpLmtOp LimitOption
155 ArpVel Velocity
156 ArpDur Duration
159 ArpGliss Glissando
Parameter Range of Values Default
Tempo 20 to 120 120
Clock Source Internal, External Internal
Arpeggiator Global Off, Arp 1 to 16 Off
Arpeggiator Sync Not in Sync, Sync Mode Not in Sync
Aux FX Channel 1 to 16 1
Mutes Zone Mutes, KB3 Control Zone Mutes
KB3 Channel 1 to 16 1
Controller Corresponding ARPZON Parameter

Kurzweil PC3 Specifications

General

Polyphony	128 voices
Sound Engine	VAST (Variable Architecture Synthesis Technology)
Display	240 x 64 backlit LCD
MIDI	In, Out, Thru
Multitimbral	16 parts
Effects	reverbs, delays, chorus, flanger, phaser, distortion
Sequencer	16-track sequencer
Type	Synthesizer Workstation
Oscillators	VAST oscillators
Memory	64MB
Connectivity	USB, MIDI