Kurzweil PC3 Musician's Guide

Setup Mode
The Continuous Control Pedal (CPEDAL) Page
7-31
The Continuous Control Pedal (CPEDAL) Page
If you look at the back of the instrument, you will see that there are two jacks for plugging in
two CC (Continuous Control) pedals and a jack labeled Breath Controller. Like the nine
programmable sliders, you can assign these controllers on each of the 16 zones, or you can
assign any combination of these controllers to the same zone.
The CPEDAL page parameters are described in Continuous Controllers on page 7-20.
Parameter Range of Values Default
Destination (CPed1) Control Destination List Express
Destination (CPed2) Control Destination List Foot
Destination (Breath) Control Destination List Breath
Scale ± 300% 100%
Add -128 to +127 0
Curve Curve List (see text) Linear
Entry Value None, 0 to 127 None
Exit Value None, 0 to 127 None

Kurzweil PC3 Specifications

General

Polyphony	128 voices
Sound Engine	VAST (Variable Architecture Synthesis Technology)
Display	240 x 64 backlit LCD
MIDI	In, Out, Thru
Multitimbral	16 parts
Effects	reverbs, delays, chorus, flanger, phaser, distortion
Sequencer	16-track sequencer
Type	Synthesizer Workstation
Oscillators	VAST oscillators
Memory	64MB
Connectivity	USB, MIDI