9-4
Effects
Basic Overview
Master Effects
There are two Master Effects that are applied at the final stage of the signal path: an EQ and a
Compressor. These are global effects, and apply to all signals routed to the PC3’s primary
outputs. Neither the EQ nor the Compressor use up any DSP units, so you needn’t account for
them when allocating effects processing power.
See Equalizers (EQ) on page 9-13 and Compressors, Expanders, and Gates on page 9-14 for
explanations of the parameters for the Master EQ and Compressor.
The Master Effects can be accessed in the MASTER page in Effects mode, or the MASTFX in
Setup mode and Song mode.
To Next Page
Loading...
