11-8
Master Mode
The Soft Buttons in Master Mode (Page 1 and Page 2)
Delete
The Delete Objects utility is very useful for reclaiming unused RAM in your PC3. This utility
allows you to select any arbitrary group of objects for deleting. This can be a convenient way to
delete individual or selected groups of objects. However, if you want to delete an entire bank or
everything in RAM, the Delete soft button on the Master page is quicker.
If any of the selected objects have dependents that were not selected, you will see the question:
Delete dependent objects?
If you answer Yes to this question, all dependent objects of the selected objects are deleted,
unless they are being used as dependents of other objects that are to remain in memory.
Answering No will delete only those objects that were selected.
CLOCK
Pressing the CLOCK soft button calls up the PC3 System Clock page.
TapTmp
Pressing the TapTmp soft button calls up the Tap Tempo page, where you can “tap” the system
tempo with the Tap soft button. You can also assign a Tap Controller to be used as a tap tempo
button when not in the Tap Tempo page.
Along the bottom four Program Category Select buttons, a lit LED moves from left to right at
the tempo displayed on the Tap Tempo page.
You can also call up the Tap Tempo page from any other page by pressing the < and > buttons
simultaneously.
To Next Page
Loading...
Need help?
General
