Kurzweil PC3 Musician's Guide

MIDI Mode
Program Change Formats
10-9
memory bank. You’ll know which memory bank is selected by looking at the ID of the currently
selected Quick Access bank in the top line of the Quick Access mode page.
QAccess and MIDI Transmission
If you’re in Quick Access mode and you’re using the QAccess format for the program change
type, selecting QA banks or bank entries from the PC3 (with the alphanumeric buttonpad, the
cursor buttons, the Alpha Wheel, the Plus/Minus buttons, or the Chan/Layer buttons) also
sends corresponding program change commands to the PC3’s MIDI Out port. The PC3 sends
either an MC 0 or 32 message followed by a PCH. The following tables give specific examples.
Current
QA Bank
Entry From
Alphanumeric Pad
Commands Sent
MC 0 or 32 PCH
10010
19019
20020
29029
99099
12 8 1 0
19 9 1 99
20 0 2 0
29 9 2 99
75 9 7 59
100 0 0 0
105 9 0 59
110 9 1 99
117 7 1 77
119 9 1 99
Table 10-1 QAccess Program Change Examples

Kurzweil PC3 Specifications

General

Polyphony	128 voices
Sound Engine	VAST (Variable Architecture Synthesis Technology)
Display	240 x 64 backlit LCD
MIDI	In, Out, Thru
Multitimbral	16 parts
Effects	reverbs, delays, chorus, flanger, phaser, distortion
Sequencer	16-track sequencer
Type	Synthesizer Workstation
Oscillators	VAST oscillators
Memory	64MB
Connectivity	USB, MIDI