Program Mode
The LFO Page
6-37
Minimum Rate
This is the slowest rate at which the LFO runs. When its Rate Control is set to OFF, or when the
control source assigned to it is at its minimum, the LFO runs at its minimum rate. As previously
mentioned, the values 1/4 note, 1/8 note, 1/8 triplet, and 1/16 note sync the Minimum Rate
with the PC3’s system tempo. Of course, if you choose to tempo sync your LFO, then the LFO
rate is fixed, and you can specify neither Maximum Rate nor Rate Control. The display changes
thusly:
Maximum Rate
This is the fastest possible rate for the LFO. When its Rate Control is set to ON, or when the
control source assigned to it is at its maximum, the LFO runs at its maximum rate.
Parameter Group (Available for
each of LFO1 and LFO2)
Range of Values Default
Minimum Rate 1/4 note, 1/8 note, 1/8 triplet, 1/16 note,
0 to 24 Hz
0.00
Maximum Rate 0 to 24 Hz 0.00
Rate Control Control Source List Off
LFO Shape LFO Shape List (Ref. Guide) Sine
LFO Start Phase 0, 90, 180, 270 Degrees 0
To Next Page
Loading...
