Kurzweil PC3 Musician's Guide

Setup Mode
The RIFF2 Page
7-49
zone or to the first available zone). If another riff is already running, DownBeatWait behaves
just like DownBeat.
With this SyncType to AnyBeatWait, the riff will wait for the next beat to start. The difference
from AnyBeat is that if there is no riff to sync to, this riff will not start. This can be useful if you
want to start multiple riffs synced to one riff. You could have a bass riff set to AnyBeatWait, for
instance, and trigger the riff while no other riffs are running. As soon as you start another riff,
the bass riff will start playing as well (provided that it is set to sync to another zone or first
available). If another riff is already running, AnyBeatWait behaves just like AnyBeat.
The RIFF2 Page
The second Riff page appears as shown below, and has the following parameters:
Parameter Range of Values Default
Link Off, On Off
Re Channel Off, On Off
Transpose Off, On Off
Root Note C -1 to G9 C4
Duration 1 to 1000% 100%
Tick Offset 0
Tempo BPM Sequence, Setup,
External, 20 to 400
Sequence
Source Track ALL, 1 to 128 ALL
Start
(Bar)
(Beat) 1 to 4
(Tick) 0 to 959 0
Stop
(Bar)
(Beat) 1 to 4
(Tick) 0 to 959 0
Velocity 0 to 255% 100%

Kurzweil PC3 Specifications

General

Polyphony	128 voices
Sound Engine	VAST (Variable Architecture Synthesis Technology)
Display	240 x 64 backlit LCD
MIDI	In, Out, Thru
Multitimbral	16 parts
Effects	reverbs, delays, chorus, flanger, phaser, distortion
Sequencer	16-track sequencer
Type	Synthesizer Workstation
Oscillators	VAST oscillators
Memory	64MB
Connectivity	USB, MIDI